AS-40M/FS-409 40MHz Multifunction Oscilloscope
Products from producer
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Technical characteristics
- Scan TypeUniversal
Description
A 40MHz analog oscilloscope built-in with a 5MHz function generator, and a 50MHz auto-range, auto-gatetime counter. Its function generator and counter can be operated independently or jointly.
SPECIFICATIONS:
- CRT Type: 6-inch rectangular with integral graticule, P31 phosphor
- Display Area: 8x10 div (1 div = 1 cm)
- Accelerating Voltage: 2kV
- Trace Rotation: Electrical, front panel adjustable
- Cal/Probe Compensation Voltage: 2Vp-p +3% square wave, 1kHz nominal
- CH2 (Y) Output: 50mV/div (nominal into 50ohms load)
- Output Impedance: Approximately 5?
- Frequency Response: 20Hz to 30MHz, -3dB
- Power Requirement: 100~130VAC or 200-260VAC, 50/60Hz, 50 Watts
- Dimensions (HxWxD): 5.2in x 12.8in x 15.7in (132x324x398mm)
- Weight: 18.7lbs (8.5kg)
- Environment Within Specified Accuracy: +10°C to 350°C, 10% to 80% relative humidity
- Full Operation: 0°C to 50°C, 10% to 80% relative humidity
- Storage Temperature: -30°C to 70°C, 10% to 90% relative humidity
- Function Generator
- Frequency: 0.5Hz~5MHz in 6 steps, controlled by one push switch
- Output Waveform: Sine, Square, Triangle (3 Waveforms total)
- Stability: 0.1% - 15 minutes after power on; 0.2% - 24 hours after power on
- Limits of Operation: 0degC~40degC, 10 to 80% relative humidity
- Limits of Operation: -20degC~70degC, 0 to 90% relative humidity
- Frequency Counter
- Display: 5 digits, 0.36in Red LED, Display at Hz or kHz unit, auto range
- Gate Time Auto Select: from 10S to 0.25S. According to the frequency of the input signal Auto select
- Gate Time Auto Detect: The gate time LED wil FLASH when with input and will OFF without input signal, Auto detect
- Gate Time Auto Reset: The data will hold 10S Max. After the input signal is stop and then auto reset
- Resolution: 0.001Hz to 1kHz according to the frequency of the input signal. auto select
- Max. Counter range: 0.1Hz to 50MHz
- Accuracy: +0.01% + 1 digit or 1/99999 + 1 digit
- Time Base: 18.432MHz + 10ppm (23°C ±5°C)
Contact the seller
AS-40M/FS-409 40MHz Multifunction Oscilloscope
We recommend to see